TUBEOFILE
50 — Power Triode, UX4 | Tubeofile | Tubeofile
← Browse Data: HighHigh quality — base, heater, all universal parameters present, and ≥50% of desirable parameters filled in. Safe to use for design decisions.
Known Equivalents & Substitutes
VT-50 CV2533
Similar Tubes (Not Drop-In Compatible)
Later DHT power triode with similar Class A output role, UX4 base, higher output (3.5W SE vs 4.6W) at lower plate voltage (250V), and 2.5V/2.5A filament UX4-base DHT power triode with similar low mu (3.5 vs 3.8) but lower plate voltage (275V vs 450V max) and lower power output (1.6W vs 4.6W) Electrical Specifications
Absolute Maximum
Anode Voltage (max) Plate Voltage (max) 450V
Anode Dissipation (max) Plate Dissipation (max) 25W
Typical Operating
Anode Voltage (typical) Plate Voltage (typical) 450V
Grid 1 Bias Voltage Grid Bias -84V
Notes
DHT tube: the filament serves as the cathode; there is no heater-cathode isolation. Pa_max = 25W per GE Essential Characteristics and radiomuseum. GE Essential Characteristics: Va=450V, Vg=-84V, Ia=55mA, ra=1800 Ohm, gm=2.1 mA/V, mu=3.8. Raytheon data confirms: Va=450V, Vg=-84V, Ia=55mA, Pout=4.6W, RL=4350 Ohm. MIL-HDBK-213A lists this tube as VT-50. Pin Layout — UX4
1 2 3 4
1 Filament (f-)
2 Plate (Anode)
3 Grid
4 Filament (f+)
Socket-Compatible Tubes ⚠ Not electrically compatible
Anode Current Plate Current
55mA
Anode Resistance Plate Resistance 1,800Ω
Transconductance Transconductance 2.1mA/V
Amplification Factor (μ) Amplification Factor 3.8—
Output
Output Power Power Output (Class A, single-ended) 4.6W
Load Impedance Load Resistance 4,350Ω
Heater
Heater Voltage Filament Voltage 7.5V
Heater Current Filament Current 1.25A